Application:
It is for making printing pads. The silicone pad is a carrier which transfers the patterns from the steel plate onto the products’ surface. Mainly uses for printing irregular patterns on plastic toys, shampoo, pen, glass, electroplating products, electroplating toys and trademarks, artwork gifts, stationery and so on.
Feature:
Very good flow
Without any impurity
Good printing effects
Cure at room temperature
Outstanding bubble releasing
An exceptional fluidity and good operability, easy to demold
Operation instructions:
1. Prepare the original silicone pad mold.
2. Mix part A liquid silicone (30 shore A) and silicone oil. The silicone oil added should be less than 30%.
3. Add 1/9 part B silicone into part A and silicone oil then mix them evenly.
4. Vacuum pumping. Take less than 10 mins for this step.
5. Pour mixed silicone into the original pad molds.
6. Put an wooden board on surface of silicone pad and set a hole to make board closely stick to pad.
7. Take out the silicone pad from mold.
Any interests, contact Luna via:
Whatsapp +86-186 6591 9751
Web: www.dysilicones.com
Email: luna@dysilicones.com
